Archive for the ‘Homebrew’ Category

First you need to get on the newest Kinect Dash. To do that use Easy freeboot 0.4. I have used it and it works extremely easily.

Download:
Code:

http://www.megaupload.com/?d=512VZWYB

http://www.multiupload.com/GM12QXY352

1. Open EFB
2. Check needed option(s)
Donor Files – I have not tested so Use at own risk
Aud_Clamp Fix. Also known as Alt SMC- if this is done on your box
you must check this.
If incorrectly checked/unchecked your box will not
boot
3. Select your Nand image
I used original unsure if XBR/freeboot will work
4. Enter your Cpu key
5. Verify motherboard revision
6. Allow dos Prompt to finish and save your New nand

Now you need to get this on your Xbox

1. Make sure new nand is named updflash.bin
2. Place on usb drive and insert into Xbox
3. Boot Xbox using eject key to start Xellous
4. Xbox will auto update and prompt to power cycle when done
5. Unplug xbox for 10 seconds and then plug in and try to boot

Assuming all previous steps have completed properly move on to getting avatar/ Kinect support.

1. Download 12611 update
Download:
Code:

http://www.megaupload.com/?d=MV041O0J

http://www.multiupload.com/AEOIENMI4I

2. Copy the contents of the .zip file to the root directory of your flash drive.
3. Unplug the USB flash drive from your computer.
4. Plug the flash drive into a USB port on your Xbox 360 console.
5. Restart the console.
6. When the console restarts, the installation program starts automatically.
Select Yes when you are prompted to update the new console
software.

Finally Install DashLaunch 2.03

1. Download:
Code:

http://www.megaupload.com/?d=H9E85JS3

http://www.multiupload.com/1DYW47LJSJ

2. Copy Installer Folder onto Xbox HDD either through USB or FTP
3. Run default.xex from FSD file-browser
4. Follow on screen Prompts.
__________________

A new version of XBSlink has been released, it’s an application that will allow you to play system-link enabled multi-player Xbox360 games over the internet, which became useful since the Dash Launch plugin removing the 30ms-ping-limit on the Xbox360.

Features:
* GUI layout changed. new tabbed design.
* remote host history. you can select previously entered hosts from a drop down.
* ?special MAC list? : you can tell XBSlink to always forward packets for certain network devices. This could enable other platforms like the original xbox.
* the info screen shows the client version number for all nodes
* program messages tab: internal status messages from XBSlink
* new About tab with info on how to use XBSlink

They are posted some WIP news:
[QUOTE]
Some users asked why UPnP is not working for them, even though it works with other applications. Well, XBSlink is using windows own UPnP/SSDP service? do i need to say more? *lol*
The next XBSlink version will feature a new UPnP Stack, independent from windows!

I will also implement the option to use a STUN server to further improve NAT traversal. Those firewalls are no match for us
[/QUOTE]

Official Site: http://www.secudb.de/~seuffert/xbslink/
Download: here

A new application has been released that will allow you to play system-link enabled multi-player Xbox360 games over the internet, which became useful since the Dash Launch plugin removing the 30ms-ping-limit on the Xbox360.

Features:
* high speed & low latency proxy of XBox360 System Link ethernet packets
* automatic NAT port forwarding via UPnP
* overview of discovered Nodes and Xboxes
* self organizing P2P structured network
* unlimited number of client nodes

Official Site: http://www.secudb.de/~seuffert/xbslink/
Download: here

Node21 (Team XeDev) now released XM360 v2.0a to the public, a tool running on homebrew 360s that will allow to organize, scan and unlock XBLA and DLC content.

What’s new/fixed (since v1.9b):
* Fixed RESC ftp command followed by RPTS command (v2.0a)
* Fixed 360 to 360 remote connections (v2.0)
* Added config command WRITE_REPORTS_ON_STARTUP, see xm360.cfg for more details (v2.0)
* Added custom FTP command “RPTS” which will write all 3 reports (v2.0)

Official Site: http://xedev.xbins.org/
Download: n/a (built with XDK)

MODFREAKz released a new version of 360 Flash Dump Tool(info), an application that will allow you to decrypt/encrypt and extract various parts of a XBOX360 flash dump and much more!

What’s new/fixed:
* Improved Nand Image detection
* Added support for small XeLL Images (1,3MB)
* Added ability to extract/import Slot0/Slot1 of ZeroPaired Images [XBR/freeBOOT/small XeLL]
* Added ability to detect/convert raw Images (made with external programmer) to proper read format
* Added ability to detect/convert Images without ECC data (made with Infectus device)
* Added ability to extract/import new ‘dae.bin’ file [DvdAuthEx]
* Added support for “Alternate KeyVault” decrypting/extracting
* Added option to rebuild an opened Nand Image with different CPU-Key (Bootloaders/HV and generic files)
* Added option in Settings to allow randomized encryption
* Added option in Settings to allow cut short BigBlock Nand Images (64MB)
* Fixed bug, regarding to saving config block checksum at wrong offset (in rare cases)
* Changed, more accurate file extraction, automatically create subfolders
* A lot of improvements and bug fixes

Official Site: n/a, by MODFREAKz
Download: here
News-Source: xboxhacker.org

From lovemhz.com
[QUOTE]
It’s been awhile to say the least so thought I would at least come back with a gift. So here it is, the complete collection of all Team Xelove past, present, finished, and unfinished projects with full source code. Hopefully this will help the Xbox 360 scene out a little

Password: <3Zippers
[/QUOTE]

Note: It includes source code of the Team XeLove releases including unreleased W.I.P. emulators for homebrew 360s like Love364 (Nintendo 64), a Playstation1 (PSX) emulator and more ….

Official Site: http://lovemhz.com
Download: here (x-s mirror)

Scuba156 of Team XeLove released Snes360 Save Game Converter:
[QUOTE]
Snes 360 Game Save Converter can extract the SRM battery saves out of Snes CON saves. It can also inject your SRM battery saves into a Snes 360 CON Save so you can use your save files from another Snes emulator with Snes360.
[/QUOTE]

Official Site: http://code.google.com/p/snes360savegameconverter/
Download: here

W.I.P. screenshots of the new upcoming FreeStyleDash v2.x build for homebrew 360s has been posted on their official forums. Besides pictures of the Games List and Achievements screens, we also see they are working on integrating XLink Kai in the homebrew dashboard. Like on the Original Xbox, XLink Kai allows to play system-link enabled multi-player Xbox360 games over the internet, which became useful since the Dash Launch plugin removing the ping-limit on the Xbox360.

Official Site: http://www.teamfsd.com (more pictures)
Download: n/a (W.I.P. screenshots – no ETA/don’t ask)

cOz released a new version of Dash Launch for homebrew 360s.

What’s new/fixed:
* consider this a beta as we still have no clue why some ini issues occur*
- added version info to data struct exported at ordinal 1
- made number of times button holds are scanned variable, longer window at boot time to sync controller and hold a button
- added region spoofing for XGetGameRegion
- DVD video play from NXE now plays DVD regardless of default setting

Official Site: n/a, by cOz
Download: n/a (built with XDK)

A new plugin has been released for DashLaunch 2.x:
[QUOTE]
Dash_launch_v2.0_for_9199 plugin file will bypass new region locks.

Please read the Dash_launch read me carefully. All of the information is contained.
The location of this plugin must be added to the launch.ini file and reflashed to the nand using the dl installer.

This ran Quantum Theory PAL on my ntsc/u
[/QUOTE]

Official Site: n/a, by ?
Download: n/a (built with XDK)
News-Source: xbox-360.logic-sunrise.com