XBOX360 USB Pro
Archive for the ‘Hacking Accessories’ Category
September 19th, 2010 | 
Author: MODFREAKz released the diagram to read/write the NAND of the Xbox360 S (alias v5, Valhalla, Vejle or Trinity – whatever codename you prefer 
) with NandPro via USB SPI.
This isn’t currently not useful for end-user as all Xbox360 S consoles of course come with locked CB, so the JTAG/SMC hack is not possible on these consoles. But this is of course useful for new research and who knows what the future will bring…
News-Source: xboxhacker.org
Posted in 
From joystiq.com:
[QUOTE]
That email purportedly sent out by Microsoft a couple weeks back inviting its recipients into a Kinect beta program? Yeah — it was legit. Joystiq has received corroborating evidence confirming the program, including pictures of the promised Kinect-enabled Dashboard update running on a participant’s retail console. In them, you can clearly see the flatter presentation, new mini-guide and revamped Avatar editor — complete with a re-proportioned Avatar.
[/QUOTE]
Full Story (with lots of pics): joystiq.com
From team-xecuter.com:
[QUOTE]
Production has just begun so we will give you a delivery date shortly.
This kit has been designed with the beginner in mind. It’s been in development for a while due to the absolute precision and stability needed to make sure it works for the the lifetime of the DVD Drive with no soldering or glue for trace repairs. We have even included a built in continuity tester to make sure your trace cuts are perfect.
Installation is simple. Make 3 trace cuts (The same as LT Switch v1.X), fit the LT Clip PCB to the Liteon PCB and use the continuity test button to make sure your cuts are correct (Green LED = Good, Red LED = bad). Once you have a Green LED you then fit the specially designed clip to fix the PCB in place. That’s it !
The LT Clip can be used with either the new LT Switch v2 or the CK3 Probe II. The first batch will be shipped bundled with the LT Switch v2 and then there will be options later.
We expect the cost for the complete LT Clip & LT Switch v2 bundle kit to be no more than $19.95.
* If you are skilled and can solder then you can use the LT Switch v1.5
* If you are a multiple modder who can solder but wants to be fast and cost effective then you have the CK3 Probe II
* If you are a beginner who has no soldering skills or equipment, doesn’t want to buy or use conductive glue and doesn’t want the expense to post their console to someone for modding – then the LT Clip solution is perfect for you.
Now everyone has a solution to meet their skills and budget.
[/QUOTE]
Full Story with more pics and install info: team-xecuter.com
From 360xtractorpro.com:
[QUOTE]
We finally finished the Remote Command Specification document for coders, we are bundling it with the Remote Command Application (the one you see on the Feature Demonstration Video), we included also the Source Code of the Application as reference. If you are just curious and want to test without compile we included the executable ready to run (Requires .net framework 3.5 installed on your PC). You can find the Specification and Application on the Downloads Section or also Clicking Here.
Also we are releasing the Firmware Update 1.3 fixing some stability issues and adding new buzzer feature, this update can be obtained from the Downloads Section its also included on the above document for simplicity.
[/QUOTE]
Official Site: http://www.360xtractorpro.com
Buy Maximus Xtractor2: foundmy.com
Meant to post this other day but forgot, better late then never though
The Jungleflasher User Guide has now been revamped, restyled and added to!
Based on Jungleflasher 0.1.73(108) and All current drive revisions catered for.
It has been written in such a way to be very user friendly. Utilizing flowcharts to enable users to easily find the exact methods required dependant on their drive, firmware and chipset! Clickable links take you straight to the relevant section for your needs. In addition a broad FAQ section has been added to cater for 99% of the most common problems/questions!
Download: Here
Official Site: Here
From 360xtractorpro.com:
[QUOTE]
We are releasing the very first version of the Manual (still work in process) for those users who got your Xtractor 2 units earlier. You can locate it on the Downloads Section. We are preparing now the sample applications and the Remote Command documentation for coders.
Also we had reports of Xtractor 2 causing problems with Spear not allowing reading keys with DVDKey/DVDKey32(info) in Jungleflasher, we traced the bug and we are issuing the first Firmware Update for Xtractor 2. You can find it on our Downloads Section. Its recomended you read the Manual (Section 6) to learn how to update the firmware of your Xtractor 2
[/QUOTE]
Official Site: http://www.360xtractorpro.com
Buy Maximus Xtractor2: divineo.com
From team-xecuter.com:
[QUOTE]
The final development phase of the much anticipated CK3-CP is proceeding at full pace. We can’t wait to release what will be THE defacto 360 firmware tool – and much more. Here’s another video to give you a peak at how the LCD navigates some of the Jungle Flasher functions 
[/QUOTE]
Official Site: http://team-xecuter.com
Here is a simple tool to make a Freeboot image
Easy freeBOOT by Sneaky Peanut
==============================
Easy freeBOOT is a simple Application which allows you to run freeBOOT using a GUI instead of command line.
Instructions
============
Firstly download freeBOOT 0.31 and the Dashboard Version 9199 from xBinsAdd the ‘Easy Freeboot.exe’ to the same directory as freeBOOT
Place you nand dump in the same directory as ‘Easy Freeboot.exe’
Then rename the dump ’7371.bin’
Make sure that the ‘SMC.bin’ and the ’9199 Dash’ is in the ‘data’ folder
Run ‘Easy Freeboot.exe’
Paste your CPU Key into the text box
Then select your motherboard type either:
‘Xenon’ ‘Zephyr’ ‘Falcon’ ‘Jasper 16MB’ ‘Jasper 256MB’ ‘Jasper 512MB’
After selecting your motherboard type, hit ‘Start’
Let the program run, you should see the message “DONE, Image is under /FREEBOOTIMAGE.bin”
Many Thanks to The freestyle Team, v3n3 and Exorial.
Just download from here.http://v3n3.de/files/SneakyPeanut/
From 360xtractorpro.com:
[QUOTE]
Here is a small video showing some of the Main Features of Xtractor 2, as you can appreciate after watching the video we have put lot of effort and hard work on this redesign. I would like to thank everyone involved. There is More to come !!
[/QUOTE]
Official Site: http://www.360xtractorpro.com
