XBOX360 USB Pro
Author Archive
March 8th, 2012 | 
Author: From team-xecuter.com:
[QUOTE]
We are happy to finally release the Xenon RGH Hack. This is by no means meant to be used for an everyday RGH as its as bad if not worse than a Zephyr, however it does work and will be perfect for those who have a Xenon where they lost their DVD key or an unbanned key vault.
Here is the readme included with the release:
* Wiring
Generate your ecc image using the latest version of J-Runner and flash to your NAND (+w16 just like a regular RGH).
Program your TX CoolRunner (or whatever flavor RGH mod you are using) with the tx-xenon.xsvf or tx-xenon.jed file.
The Xenon has a capacitor on CPU_RST that was removed in later models. C7R112 (located near the xclamp under the CPU) must be de-soldered, and the CPU_RST wire from the TX CoolRunner(D) must be soldered to the left pad (non grounded pad).
A 47nf ( 0.047uf) capacitor needs to be added between PLL_BYPASS(+) and GND(-). (If you have a genuine TX CoolRunner REV B you can use the on-board by bridging the CAP jumper)
A 220-270pf capacitor should be added between CPU_RST(+) and GND(-) on the cpld. (If you have a genuine TX CoolRunner REV B this is already included in the design so not required)
An easy to follow picture guide can be found here: http://www.team-xecuter.com/coolrunner/install/phat_xenon.jpg
* Troubleshooting
Using a TX CoolRunner Rev B, and after applying various troubleshooting measures we have had glitches ranging from instant to 20 minutes.
The debug LED should flash on for less than a second and repeat every 5 seconds. If your LED stays on or does not come on at all, it is usually because of something being wrong with PLL_BYPASS. Try different values of capacitors and wires. If you have enabled the CAP on REV B of the TX CoolRunner, simply un-bridge it and try a 47nF cap instead as per the instructions above.
If it still has not glitched after several hours, try different values of capacitors on CPU_RST of your RGH mod. A longer wire / low-loss 50 ohm double shielded cable may also help with this.
To help increase boot times and stability (on all RGH installs not just Xenon) we recommend that you try Low-Loss Double Shielded 50 ohm cable. It’s very cheap to use and quite effective ? so a quick shout out to www.xconsoles.com who supplied a batch of high quality cable for our development team to use. It’s less than 75 cents a foot ? not bad.
NOTE: Remember when programming the TX CoolRunner that the Xbox power is NOT connected and that the switch is set to PRG before you connect the JTAG cable. If you connect the JTAG cable and it is set to NOR with the Xbox power connected, it can damage your NAND-X and/or CoolRunner. When you have finished programming, switch it back to NOR and then power on the Xbox.
* The Xenon Hack
Please note that this hack is not available on consoles updated to dashboards 14717 or 14719.
If you are seeing the debug led it means that the cpu is probably not crashing and the issue addressed by gligli/tiros has been fixed (This can of course be a false positive as sometimes the CPU could be crashing but the SMC restarts fine ? we can never be 100% sure)
So far, this is really only useful for a one time cpu_key dump. There will undoubtedly be ways of optimizing this hack in the future and who knows, it may become a reliable glitch one day.
We would appreciate that you give as much feedback to our support forums as possible to help others achieve better results and to improve this method. For now we can leave this and go back to RGH2.0 for Zephyr, Falcon, Jasper and also of course, the Corona.
TX CoolRunner Support Forums: http://www.team-xecuter.com/forums/forumdisplay.php?f=174
Enjoy!
Xbox 360 Xenon RGH Hack brought to you by the Xecuter RGH Development Team
www.team-xecuter.com
* Thanks
Thanks are extended to Tiros & Gligli, without your work none of this would have been possible.
A special thanks goes out to cOz ? your work on Dashlaunch proved to be an invaluable contribution and we look froward to your next exciting project.
Greets: Team Jungle, Team FSD, Freeboot, Libxenon & RGLoader.
[/QUOTE]
From team-xecuter.com:
[QUOTE]
Here is the build.py for Xecuter’s Xenon RGH Hack
J-Runner has no use for build.py as it doesn’t use Python (or Nandpro) but figured there would be some guys out there who still use this method.
* Thanks to:
RF1911 for the XENON SMC
GliGli & Tiros for the original build.py
cOz for the Universal patch
To the Xecuter RGH team ? you know who you are.
* Greets to:
#libxenon #FreeStyleDash #freeboot #rgloader #J-Runner #JungleFlasher #c4e
Also one of our forum members nitramb released a much better 14717/14719 python script than the one released by those Italian guys. Again, none of this is required for the J-Runner app.
Remember, when running to be first you should instead think about walking to be best
[/QUOTE]
Official Site: http://team-xecuter.com
Download: here
Posted in Uncategorized | 
Rogero released a new version of 360 Multi Builder – an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images
What’s new/fixed:
* Added Support for building ECC image for Slim/Trinity updated to Dash 14717/14719 (CB9230)
* Updated DashLaunch to latest version 2.32 (Respect to c0z for his great work and it’s so sad indeed to see him leave).
Official Site/Download: tortuga-cove.com
The guys over at consoleopen.com released a modified Build.py to make the RGH work on Slim (trinity) consoles with the new 14719 dash:
[QUOTE]
Build.py for 14719 slim (trinity board) is out in the wild thanks to marchisio and vola, old glitchip and old timings are still working!
[/QUOTE]
Official Site/Download: consoleopen.com
From team-xecuter.com:
[QUOTE]
If you have the 14717/14719 dash update on your slim and you were not able to dump your CPU KEY ? you can now use the new J-Runner is released which includes the latest patches for 14719. The new build is 264 ? so update now!
Also includes latest Dashboard with cOz’s fakelive patch and the latest xebuild.
We wanted to wait on releasing this as it can easily be patched if you don’t already have your CPU Key ? we have been warning you for the last couple of weeks to get it NOW before it is blocked.
Thanks to some other guys who carelessly released the info without a thought to how it would affect the scene ? many users may never have the chance to glitch their box if they weren’t able to read this info first as it was rushed out with no correct preparation. We were hoping to release at the same time as the RGH2.0 for Phats but that will now have to wait. (Still under heavy testing to make it as reliable as possible ? its a much different install, unlike the slim where the process is the same as before)
Anyway, grab it asap and get your CPU Key NOW ! If you don’t get your CPU KEY before this is patched then you may never be able to glitch your Xbox.
Once you have your CPU Key ? it doesn’t matter how many times it’s patched in the future ? it should work just fine.
On a side note, if you want to improve your boot times you can use Hi-Grade 50ohm Double Shielded Low-Loss Cable. When used with the SLIM POST QSB we found some testers console times and stability were increased dramatically. At only $1-$2 a foot, it’s worth giving a try. We also suggest you try switching to phat <> slim on your CoolRunner to see if your times and stability are improved. Some Phats like being switched to Slim and vice-verse, every console is different so these tips should help you find your sweet spot. Most slims should expect to boot within 1-4 glitches (5-20 seconds).
[/QUOTE]
Official Site: http://team-xecuter.com
Download: here
Ced2911 released a new version of his PS1 emulator using the free/legal libxenon for homebrew/JTAG 360s:
[QUOTE]
Pcsxr-xenon is a sony playstation 1 emulator using libxenon, based on lastest PCSX-Reloaded source code available.
What’s new/fixed:
* New gpu plugin, allow to play game in hd !!
* Load game from fat, ext2/3/4, ntfs device
* Save states support
Thanks:
Gligli, Razkar, Tuxuser, [c0z], lantus, all the libxenon-dev team
[/QUOTE]
Official Site/Download: http://libxenon.org
cOz released a new version of Dash Launch build for XDK-homebrew RGH/JTAG 360s.
What’s new/fixed:
* fixed glitch jasper big block patch installer
* reworked contpatch yet again, should perform equal to xm360 now (thanks node21!)
-new patch only operates on containers of type 000D0000 (XBLA) and 00000002 (ADDONS) of LIVE or PIRS types
Official Site: n/a, by cOz
Download: n/a (built with XDK)
Full Readme/NFO: xbins.org
Swizzy released a new version of his GUI for xeBuild.
What’s new/fixed:
- Fixed: You can now choose to change your CFLDV and use the nofcrt.bin check patch at the same time… (there was a typo previously)
- Added: Argument/Parameter editor to keep such errors as this from happening again (NOTE: Limited to advanced mode to keep noobs away from killing consoles by editing without knowing what they’re doing!)
- Fixed: When building multipile images without exiting the program you’ll no longer get multipile entries of “-o cfldv=xx” on the command sent to xebuild…
- Added: Option to extract vital files (kv.bin, smc.bin and smc_config.bin), this will extract these files instead of copying your nand to the data directory (only available when making xeBuild images)
** NOTE: This feature is limited to advanced mode and you will need to manually remap the resulting nand! it’ll first check for previously extracted files before doing this (it won’t overwrite already existing files), and upon completion it’ll delete them…**
** NOTE: At this time i’m unable to extract smc_config.bin, so for now it’ll only check if it exists (use 360 flash dump tool to extract it!) **
- Changed: The generate button is now disabled upon clicking it, thus not allowing you to run 2 operations at the same time, if you forgot to change something please WAIT!! (or you’ll have a mixed/messy log and the app may crash when it’s complete…)
- Changed: The dashfiles check is now done first thing after you’ve pressed the generate button, thus not creating a debuglog which is useless
- Changed: Reverted back to Logic-Sunrise as download server and default build version is now 14699
- Updated: Now using Dashlaunch 2.32
Official Site: n/a, by Swizzy
Download: n/a (might be illegal under DMCA/EUCD)
News-Source: xbox-360.logic-sunrise.com
From team-xecuter.com:
[QUOTE]
This year we are celebrating our 10th Anniversary and the team thinks it’s about time we got back into doing what we became famous for in the first place.
Enjoy this small preview…
[/QUOTE]
Official Site: http://team-xecuter.com
World Wide Reseller: http://www.foundmy.com
From infinitymod.com:
[QUOTE]
We have released the MATRIX TRIDENT (PSI) installation and instruction manual. Also available is the diagram to use the MATRIX TRIDENT with any other glitch device available on the market.
You can get both from our DOWNLOAD section. (EDIT: Fixed the installation manual download link, sorry about that guys ! 
)
We are completing also a software to enable the easy management of bad blocks when dumping the NAND and rewriting it to the MATRIX TRIDENT. This software will handle all the work in case your NAND has bad blocks tht need to be reallocated.
We also would like to inform everyone that the tests to restore glitch features to SLIM and FAT consoles that have been updated with the 14717/14719 update are proceeding at fast peace.
More tests are required to ensure that every bug has been ironed out, but we will have soon good news for owners of Glitch devices.
[/QUOTE]
Official Site: http://www.infinitymod.com
From wasabi360.com:
[QUOTE]
We have released Wasabi 360 Ultra firmware v1.2 which includes the following changes:
* Automatic drive key extraction for Xbox Slim Liteon 16D4S drives added
* Dynamic AP25 responses based on disc profiling is now supported, allowing AP25 protected titles to function with the latest dashboard + console specific dae.bin updates
* AP25 topology data may be sourced from either the provided AP25 database or from within iXtreme LT v3 ISO files
* Support for GPT partitions added, enabling support for drives larger than 2TB
In addition, the Wasabi 360 Ultra users guide has been updated to reflect the changes in this firmware release. Both may be obtained from the downloads page.
[/QUOTE]
Official Site: http://wasabi360.com
Download: here
Buy Now at our World Wide Reseller: http://www.foundmy.com
