XBOX360 USB Pro
Author Archive
January 23rd, 2012 | 
Author: The BoxZii Team released ‘Module 2′ of their ODD Emulator:
[QUOTE]
Module 2 : External Full Colour 2’2″ TFT Touchscreen panel for USB HDD/Pendrive (No PC required)
* Full Colour 2’2″ TFT Touchscreen
* Full Colour touchscreen coverflow iso/config selection system
* 3Ports HUB included for USB HDD/Pendrive (No EXTRA Hub cost)
* NTFS Filesystem supported
* USB / SD upgrades for Actel and Microcontroller system
* External SD socket (No needed disassembly if SD card replacement required)
* Full clean installation / Place the module 2 whereever you want
* Easy Installation/Just need plug USB cable from Boxzii Module 1
[/QUOTE]
Official Site: http://www.boxzii.com
Posted in Uncategorized | 
From x360glitchip.com:
[QUOTE]
Today a new version of our great software for glitchip flash is available.
Indeed, this one is now at version 1.3 and brings you an alternative timing for Trinity motherboard.
This alternative timing will allow hard to glitch xbox’s owners to get better boots.
This one is compatible with all x360Glitchips revisions, but works better with v1.4 and the next v2.0.
[/QUOTE]
Official Site: http://www.x360glitchip.com
Download: here
From x360glitchip.com:
[QUOTE]
When other teams just copy others and/or make only business with their chip without bringing something new and/or make news with nothing new… x360Glitchip brings you the FIRST WORLD Corona Ready chip.
As you know Corona (New motherboard revision after Trinity) were not Glitch compatible because the HANA chip had been removed which were needed for Timing through the CLK_STBY Wire.
The x360Glitchip v2 is the first world chip which doesn’t need this point, and so become Corona Ready.
Of course, the build.py of the Glitch Hack has to be updated to handle the new CB 13121.
Others functionnalities will be announced soon, cause the x360Glitchip Team doesn’t stop here. 
Here a video showing a Trinity Motherboard booting without the CLK_STBY Wire on a modified x360Glitchip v1.4 in order to be Corona Ready.
You will note :
- The missing B point (Not needed now)
- The great booting time : (10s, 16s, 7s, 12s)
[/QUOTE]
Official Site: http://www.x360glitchip.com
Team RGLoader released a new version of RESET GLITCH LOADER-dev which allows you to create a DevKit NAND for retail consoles with the Reset Glitch Hack, and give you most of the DevKit functionality on your retail 360:
[QUOTE]
*THIS IS A BETA RELEASE, NOT EVEN THE NFO IS FINISHED YET*
Xell dual boot has been added. Power on the xbox using the eject button to boot into xell. Yay libxenon 
Bad blocks are now automatically taken care of and there is no need to run the output image through nandpro.
Font files have been added to the nand image to fix the issues with FSD. New filesystem package must be used. (thanks cOz!)
Jtag support will come soon, I should be getting a jtag xbox any day now to test on.
Retail profiles must be resigned to work for dev.
Things to come in final release—
* Big block support.
* INI files will replace the bat files.
* GUI Builder.
* hvxbootOS
* much more…
What’s new/fixed:
* Added KV editing to the GUI
* Xell dual boot (xell-gggggg.bin)
* Bad block support
* Added font files to nand image to fix fsd (thanks cOz)
* No need to run image through nandpro anymore
* More error handling, builder doesn’t say successful build every time
[/QUOTE]
Official Site: #RGLoader @ EFnet | tortuga-cove.com
Download: n/a (might be illegal under DMCA/EUCD)
News-Source/Full NFO: xbins.org
From 360lizard.com:
[QUOTE]
Thanks to C4E for releasing LT3.0 for Slim Liteon Drives.
We have updated the whole range of Lizard software tools to work with this new Relese. We recommend follow the next guidelines to get your update working without issues:
a) Update your Lizard to Gecko 1.28. If you have doubts check the Tutorial
b) Open Lizard Toolbox, Press “Get Device Details” to read Lizard Serial
c) Go to Settings Tab then press button “Get Lizard Updates”, this will first update your Lizard Toolbox Version to 1.51.
d) After the first update succed, repeat steps “b” and “c” to download an update the new Fileset (LTPLUS 3.00 b)
d) If you use the Standalone feature on Lizard you need also download the new SD File Pack LT 3.00b and extract on your Micro SD Card, you can grab it from the blog.
* Note: if you dont see the button “Check Lizard Update” on Lizard Toolbox, then it means your Lizard Toolbox version is too old, if thats the case then grab the latest Toolbox from the Downloads page)
Alternatively if you prefer do updates manually then grab the Toolbox 1.51 from our Downloads Page and the Fileset and the SD File Pack from the blog
[/QUOTE]
Official Site: http://www.360lizard.com
As always with a new C4E iXtreme release (LT+ v3.0 SLIM Lite-On), Team Jungle comes with a new version of JungleFlasher to add full support for the new firmwares.
What’s new/fixed:
* Support for LT Plus 3.0
-Lite-on Slim 0272, 0225, 0401, 1071
Official Site: http://www.jungleflasher.net
Download: here
C4E released the iXtreme LT+ v3.0 CFW for the SLIM 0272/0225/0401/1071 Lite-On (Philips-LiteOn DG-16D4S) drives:
[QUOTE]
C4E’s iXtreme LT+ in association with Team Jungle & Team Xecuter
Official release of the iXtreme LT+ v3.0 for 0272/0225/0401/1071 slim Liteons
- Support for topology data on AP25 enabled titles. Will correctly answer any ap25 challenge eliminating need for dae.bin to create a backup.
- No need to make new backups everytime dae.bin is updated on console
- Extra support for rare firmwares
Topology Data
When ap25 was first introduced I devised a way of calculating any challenge which I called the silver bullet which I made reference to along time ago.
This was withheld until it was absolutely necessary. It was easier to replay the fixed challenges.
With unique per console ap25 challenges it has become necessary to use the silver bullet.
A series of measurements are taken across the disk. This topology data is then used to calculate a response to any ap25 challenge.
It is very important that the drive used to create the topology data is reliable at reading discs as bad topology data equals bad ap25 responses.
Liteon drives using 0800 v3 seem to be more accurate for this purpose. Only ap25 enabled titles require topology data. Activation of ap25 on older non-ap25 games although technically possible is highly unlikely.
Currently topology data for xgd3 titles are similar and topology data from one xgd3 title will pass on another xgd3 title although this is not advisable.
Per title title topology data is best as there are slight differences between titles and newer titles could have different topology than existing ones.
One liteon to go and four Hitachis. Have a great year everyone.
Thanks go to Team Jungle and all testers for their hard work and efforts in the development process.
Thanks also go to Team Xecuter for their support to this project.
[/QUOTE]
Official Site: C4Eva, jungleflasher.net, team-xecuter.com
Download: n/a (might be illegal under DMCA/EUCD)
From redsquirrel87.com:
[QUOTE]
What’s it?
It’s a simple Linux/Windows tool to search for and download updates for your XBOX360 games directly from your PC (no need of XBOX Live!))
You have simply to select one or more XBOX360 ISOs and the program automatically will get the Media-ID (using ABGX) and will search for the latest available update on the online database of xbuc.net. Then you’ll can download it directly using this program, so without the need to open any internet browser or external programs.
What’s new/fixed (v3.0 – Linux ONLY):
* Completely rewritten the layout of the GUI (again)
* Now the program’s window is resizable so it can fit any screen resolution
* Moved all controls from buttons into menus
* Added keyboard shortcuts to the most important commands
* Now the program saves the settings (input/output folder and modes) and automatically reload them at next startup
* New dependency for the program: gambas2-gb-settings
What’s new/fixed (v2.0 – both Windows and Linux):
* Completely rewritten the layout of the GUI
* Now the program will not close automatically
* Batch support: you can now work with more than just one ISO
* Two new options available:
-Silent Mode that performs all operations without asking for user confirmations
-Rename all Mode that prevents overwriting files which are named in the same way
[/QUOTE]
Official Site: http://www.redsquirrel87.com
Download Linux v3.0: here
Download Windows v2.0: here
Team RGLoader released RESET GLITCH LOADER-dev 0v100 which will allow to create a DevKit NAND for retail consoles with the Reset Glitch Hack, and give you most of the DevKit functionality on your retail 360:
[QUOTE]
*THIS IS A BETA RELEASE, NOT EVEN THE NFO IS FINISHED YET*
Rgloader-dev 0v98 got leaked a few weeks back and contains a few bugs like slims showing up as test kits etc. This build contains the latest patches for all the xbox files but does not support big block or bad block.
If you manage the bad blocks yourself you might be able to get around the bad block issue.
Things to come in final release:
* Big block support.
* INI files will replace the bat files.
* GUI Builder.
* Xell dual boot & hvxbootOS
What’s new/fixed in 0v100:
* Added 14699 patches
* Moved files location on hdd
* Slims show up as dev kit on 14699 without xbdm.ini or modded xbdm.xex
* Retail disc support on slims
* Added neededfiles.txt to the folders
[/QUOTE]
Official Site: #RGLoader @ EFnet
Download: n/a (might be illegal under DMCA/EUCD)
News-Source/Full NFO: xbins.org
From redsquirrel87.com:
[QUOTE]
What’s it?
It’s a simple Linux tool to search for and download updates for your XBOX360 games directly from your PC (no need of XBOX Live!))
You have simply to select a XBOX360 ISO and the program automatically will get the Media-ID (using ABGX) and will search for the latest available update on the online database of xbuc.net. Then you’ll can download it directly using this program, so without the need to open any internet browser or external programs.
What’s new/fixed:
* Fixed a bug that could bring the program to crash during the download of the files.
* Added a function that checks if the file ABGX360 got correctly the execute permissions
* Added a timeout check to curl (30 sec)
[/QUOTE]
Official Site: http://www.redsquirrel87.com
Download Linux v1.1: here
Download Windows (still at v1.0): here
